CBL-NM-NM-400-30
30 ft LMR-400 RF cable with N-male connectors at both ends.
View productSAO4503I-LPP
Rugged, ground-plane-independent 450–470 MHz low-profile antenna with 3 dBi gain, a permanent stud mount and an N-female connection.
Ask about this product
Overview
Field-ready by design.
SAO4503I-LPP is a rugged, low-profile omnidirectional antenna for 450–470 MHz UHF data links. Its ground-plane-independent design removes the need for a metallic mounting surface, so it can be installed on fiberglass, composite and other non-metallic panels up to 0.2 inches thick.
The whipless dome stands 3.3 inches above the mounting surface, providing a discreet and mechanically robust alternative to exposed whip antennas on vehicles, trailers and equipment enclosures. A permanent 5/8 inch stud mount with an O-ring seal secures the antenna against weather and vibration, and the N-female termination underneath the mounting surface keeps the RF connection protected and straightforward to integrate.
With 3 dBi peak gain, better than 2.0:1 VSWR and 50 W power handling across the band, SAO4503I-LPP suits mobile data, telemetry, automation and control installations that need dependable UHF coverage from a compact, sealed antenna.
01
450–470 MHz single-band coverage with 3 dBi peak gain
02
Ground-plane-independent design needs no metallic mounting surface
03
Low-profile 3.3 in dome replaces exposed whips on vehicles and equipment
04
Permanent 5/8 in stud mount with O-ring seal and N-female termination
05
Handles up to 50 W for indoor or outdoor installations
Technical details
Specifications
Specifications are subject to change. Contact Satel USA to confirm requirements for your application and region.
Electrical
- Frequency range
- 450–470 MHz
- Peak gain
- 3 dBi nominal
- VSWR
- Less than 2.0:1 average
- Nominal impedance
- 50 Ω
- Maximum input power
- 50 W
- Polarization
- Vertical and horizontal
- Radiation pattern
- Omnidirectional
- Half-power beamwidth
- 130° elevation × 360° azimuth
Mechanical and environmental
- Mount
- Permanent 5/8 in stud; no ground plane required
- RF connector
- N female
- Overall height
- 4.135 in (10.5 cm)
- Height above mounting surface
- 3.3 in (8.38 cm)
- Below-deck stud length
- 0.835 in (2.12 cm)
- Diameter
- 1.44 in (3.65 cm)
- Weight
- 113.4 g (0.25 lb)
- Radome
- White ABS
- Mounting hardware
- 5/8-24 hex nut (1 in hex) and lock washer with O-ring seal
- Mounting surface
- Non-metallic, up to 0.2 in (5.1 mm) thick
- Operating environment
- Indoor or outdoor
- Material compliance
- RoHS, CE and UKCA
Keep exploring
Related products