# SPCLFP

Fully automatic 10-step, 6 A charger and maintainer for 12.8 V and 13.2 V LiFePO4 batteries from 3 to 72 Ah.

- Product page: https://catalog.satelusa.com/products/spclfp/
- Category: Power
- Status: current
- Part number: SPCLFP
- Image: https://catalog.satelusa.com/images/products/spclfp.webp

## Overview

SPCLFP is a fully automatic charger and maintainer for 12.8 V and 13.2 V lithium iron phosphate batteries. Its 10-step charging program monitors the battery throughout recovery, charging, testing and maintenance, adjusting current automatically for batteries from 3 to 72 Ah.

The charger can begin recovery at battery voltages as low as 0.5 V and checks charge acceptance before continuing. A bad or shorted cell condition stops unnecessary charging, while spark suppression and automatic shutdown protect against short circuits and disconnected batteries.

The weatherproof, wall-mountable enclosure and included battery lead and clip set support both permanent installations and field use. Efficient maintenance operation uses less than 0.5 W in standby and is safe for extended connection.

## Highlights

- AmpMatic charge control automatically adjusts current to battery size and condition
- Three-step low-voltage recovery can start with batteries discharged as low as 0.5 V
- Continuously tests charge acceptance and warns of damaged or shorted cells
- Safe for long-term maintenance and stable battery support during ECU programming

## Specifications

### Charging

- **Battery chemistry:** Lithium iron phosphate (LiFePO4 / LFP)
- **Nominal battery voltage:** 12.8 V or 13.2 V
- **Battery capacity range:** 3–72 Ah
- **Charging current:** Up to 6 A with automatic AmpMatic current control
- **Operating voltage range:** 0.5–14.4 V
- **Charging program:** Fully automatic, 10 steps
- **Low-voltage recovery:** Three-step save and test from 0.5 V

### Input and construction

- **AC input:** 100–240 VAC, 50–60 Hz
- **Standby power:** Less than 0.5 W
- **Enclosure:** Weatherproof case with wall-mounting points
- **AC supply lead:** 6 ft (1.8 m)
- **Charging lead:** 6 ft (1.8 m), terminating in an SAE connector
- **Minimum operating temperature:** -40°F (-40°C)
- **Use:** Indoor or outdoor

### Safety and included accessories

- **Electronic protection:** Overcharge protection, spark suppression and automatic shutdown for a short circuit or disconnected battery
- **Maintenance:** Safe for long-term connection with continuous battery monitoring
- **Included connections:** Weatherproof quick-connect battery lead and battery clip set
- **Warranty:** 3-year limited replacement warranty

## Related products

- [SBLFP35](https://catalog.satelusa.com/products/sblfp35/)