SATEL MCCU-30 Multi-band Vehicle Router
A rugged multi-technology vehicle router combining LTE, UHF, dual-band Wi-Fi, Bluetooth and Gigabit Ethernet for connected machine applications.
View productSATEL MCCU-20 LTE / UHF
A rugged dual-technology GNSS RTK correction receiver that uses either UHF radio or an LTE NTRIP connection to deliver correction data over RS-232.
Ask about this product
Overview
Ready when the work begins.
SATEL MCCU-20 is an all-in-one GNSS RTK correction receiver for machine control, precision agriculture, surveying and other positioning applications. It can receive correction data from a local UHF base station or connect to an internet NTRIP caster over LTE, then forward the data to the host system through RS-232.
The two connectivity methods are selectable operating modes rather than simultaneous links. UHF supports work in areas without dependable cellular coverage, while LTE provides access to network correction services where coverage is available. In NTRIP mode, the built-in client can send the vehicle’s NMEA position to compatible casters and pass received correction data to the host without modifying the payload.
The aluminum enclosure and mated connectors carry IP67 and IP69K ratings. Power, serial and RF connections include surge and ESD protection, and the UHF path includes GNSS-band filtering. An ignition-sense input, wide DC supply range and Deutsch power/data connector support installation on vehicles and other mobile equipment.
North American variant
- YT0210: United States/Canada model with encryption support and integrated eSIM
01
UHF and LTE connectivity options in one field-ready device
02
Built-in NTRIP 2.0 client with NMEA position upstream support
03
IP67 and IP69K protection with surge-protected interfaces
04
Integrated eSIM for the SATEL CONNECT cellular service
Technical details
Specifications
Specifications are subject to change. Contact Satel USA to confirm requirements for your application and region.
RTK connectivity
- Operating modes
- UHF radio or LTE NTRIP; the two modes operate individually rather than simultaneously
- NTRIP client
- NTRIP 2.0, compliant with RTCM standard 10410.1
- Correction-data formats
- RTCM 2.x and 3.x, plus properly NTRIP-encapsulated proprietary formats
- Position upstream
- NMEA position data can be relayed to a compatible NTRIP caster
- Cellular modem
- LTE Category 4 with receive diversity
- SIM
- Integrated eSIM for SATEL CONNECT; cellular hardware also supports a factory-installed 3FF SIM depending on build variant
UHF radio
- Frequency ranges
- 410–475 MHz and 902–928 MHz, subject to regional authorization and licensing
- 400 MHz channel widths
- 12.5, 20 or 25 kHz
- 900 MHz spreading method
- Frequency-hopping spread spectrum
- Maximum carrier power
- 1 W
- GNSS coexistence
- UHF RF path includes filtering for nearby GNSS equipment
Data interface and configuration
- Serial interface
- RS-232 transmit and receive lines; no hardware handshaking
- Serial data speed
- 4,800–460,800 bps
- Recommended NTRIP format
- 8 data bits, no parity and 1 stop bit
- Power and data connector
- Deutsch DT04-6P-CL09; mating connector DT06-6S
- Configuration
- SL commands over RS-232; optional SATEL NARS-BT and SATEL Command mobile application
Mechanical and electrical
- Operating voltage
- +9–30 VDC, with −15% / +20% tolerance
- Typical power consumption
- 2.4 W receiving NTRIP; less than 1 W receiving RTK corrections over UHF
- Functional temperature range
- −30 to +70 °C
- Storage temperature range
- −40 to +85 °C
- Construction
- Aluminum housing with surge and ESD protection
- Ingress protection
- IP67 and IP69K when all connectors are correctly mated
- Dimensions
- 174 × 95 × 47 mm
- Weight
- 520 g
- Antenna connectors
- One TNC female for UHF and two SMA female connectors for LTE main and diversity
Works with
Compatibility
- SATEL-TR49-compatible UHF networks
- NTRIP 2.0 caster services
This list is not exhaustive. Other similar devices may also be compatible; contact Satel USA to confirm your application.
Keep exploring